Solar Power Fountain


How To Use

  • ⭐ 1. First, please assemble the product according to the schematic diagram.Plug the jack of pump in the jack of solar panel output.
  • ⭐ 2. Please place the solar panel in a suitable place to ensure that the sun is not blocked by other objects. When the solar panel receives sufficient sunlight, the water pump will start within 3 seconds.
  • ⭐ 3. When the pump is just put into the water, due to the air in the pump impeller, there may be insufficient water volume, etc. It is recommended to wait for the pump to spray water normally before connecting the nozzle.
  • ⭐ 4. When in use, Put the pump totally in the water with it is nozzle over the water, and cannot be dehydrated for a long time.
  • ⭐ 5. Please keep the water source clean and clean the water pump regularly to prevent foreign objects from being sucked in by the water pump and causing it to fail to work properly.
  • ⭐ 6.This product is a solar direct-drive water pump without an external battery. The height of the water spray depends entirely on the strength of the sun. When the sun is weak, the water pump will not work continuously, but will automatically start repeatedly until the sun reaches a certain intensity, and it will automatically resume continuous work.